A Sky, cable and digital tv forum. Digital TV Banter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » Digital TV Banter forum » Digital TV Newsgroups » uk.tech.tv.sky (Sky Television)
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

uk.tech.tv.sky (Sky Television) (uk.tech.tv.sky ) Technical issues of Sky television.

Sky + LNB & running another "Unofficial" Cable



 
 
Thread Tools Display Modes
  #1  
Old November 10th 06, 01:07 PM posted to uk.tech.tv.sky
Ant
external usenet poster
 
Posts: 3
Default Sky + LNB & running another "Unofficial" Cable

Hi

After having Sky + installed the other day, my duaghter wanted the old
box wired into her bedroom to watch any FTV programs.

I connected up a cable to one of the free connections on the LNB and
ran it to the box in the bedroom.

All I can get is a message with "No signal is being received"

Is there a special configuration of LNB outlets to use? The 2 running
to the main Sky + box are the outside two with the two in the middle
spare

Any help appreciated
  #2  
Old November 10th 06, 01:14 PM posted to uk.tech.tv.sky
ABC
external usenet poster
 
Posts: 69
Default Sky + LNB & running another "Unofficial" Cable


"Ant" wrote in message
...
Hi

After having Sky + installed the other day, my duaghter wanted the old
box wired into her bedroom to watch any FTV programs.

I connected up a cable to one of the free connections on the LNB and
ran it to the box in the bedroom.

All I can get is a message with "No signal is being received"

Is there a special configuration of LNB outlets to use? The 2 running
to the main Sky + box are the outside two with the two in the middle
spare

Any help appreciated


As far as I know, there's no special configuration. Each standard box
utilises one of the 4 outputs of the LNB.
Are you using CT100 cable for the downlead?


  #3  
Old November 10th 06, 01:47 PM posted to uk.tech.tv.sky
Ant
external usenet poster
 
Posts: 3
Default Sky + LNB & running another "Unofficial" Cable

On Fri, 10 Nov 2006 14:14:59 -0000, "ABC"
coughed and vomited forth:


"Ant" wrote in message
.. .
Hi

After having Sky + installed the other day, my duaghter wanted the old
box wired into her bedroom to watch any FTV programs.

I connected up a cable to one of the free connections on the LNB and
ran it to the box in the bedroom.

All I can get is a message with "No signal is being received"

Is there a special configuration of LNB outlets to use? The 2 running
to the main Sky + box are the outside two with the two in the middle
spare

Any help appreciated


As far as I know, there's no special configuration. Each standard box
utilises one of the 4 outputs of the LNB.
Are you using CT100 cable for the downlead?

Erm.... It was marked "Satelite Cable" in B&Q

Tried reterminating the connectors at both ends and still no luck.
Downstairs still working fine
  #4  
Old November 10th 06, 01:54 PM posted to uk.tech.tv.sky
Adrian A
external usenet poster
 
Posts: 1,150
Default Sky + LNB & running another "Unofficial" Cable

Ant wrote:
Hi

After having Sky + installed the other day, my duaghter wanted the old
box wired into her bedroom to watch any FTV programs.

I connected up a cable to one of the free connections on the LNB and
ran it to the box in the bedroom.

All I can get is a message with "No signal is being received"

Is there a special configuration of LNB outlets to use? The 2 running
to the main Sky + box are the outside two with the two in the middle
spare

Any help appreciated


No special configuration, make sure all the connections are properly made.


  #5  
Old November 10th 06, 01:58 PM posted to uk.tech.tv.sky
Conor
external usenet poster
 
Posts: 579
Default Sky + LNB & running another "Unofficial" Cable

In article , Ant says...

Tried reterminating the connectors at both ends and still no luck.
Downstairs still working fine

FWIW, I installed mine using my own gear. Works fine.

--
Conor

I'm really a nice guy. If I had friends, they would tell you.

Earn commission on online purchases, £2.50 just for signing up:
http://www.TopCashBack.co.uk/Conor/ref/index.htm
  #6  
Old November 10th 06, 02:03 PM posted to uk.tech.tv.sky
Bill Wright
external usenet poster
 
Posts: 8,408
Default Sky + LNB & running another "Unofficial" Cable


"Adrian A" wrote in message
om...
Ant wrote:
Hi

After having Sky + installed the other day, my duaghter wanted the old
box wired into her bedroom to watch any FTV programs.

I connected up a cable to one of the free connections on the LNB and
ran it to the box in the bedroom.

All I can get is a message with "No signal is being received"

Is there a special configuration of LNB outlets to use? The 2 running
to the main Sky + box are the outside two with the two in the middle
spare

Any help appreciated


No special configuration, make sure all the connections are properly made.


It should work. Try the old box at the new box location, using one LNB
cable.

Bill


  #7  
Old November 10th 06, 02:03 PM posted to uk.tech.tv.sky
Adrian A
external usenet poster
 
Posts: 1,150
Default Sky + LNB & running another "Unofficial" Cable

Ant wrote:
On Fri, 10 Nov 2006 14:14:59 -0000, "ABC"
coughed and vomited forth:


"Ant" wrote in message
...
Hi

After having Sky + installed the other day, my duaghter wanted the
old box wired into her bedroom to watch any FTV programs.

I connected up a cable to one of the free connections on the LNB and
ran it to the box in the bedroom.

All I can get is a message with "No signal is being received"

Is there a special configuration of LNB outlets to use? The 2
running to the main Sky + box are the outside two with the two in
the middle spare

Any help appreciated


As far as I know, there's no special configuration. Each standard box
utilises one of the 4 outputs of the LNB.
Are you using CT100 cable for the downlead?

Erm.... It was marked "Satelite Cable" in B&Q

Tried reterminating the connectors at both ends and still no luck.
Downstairs still working fine


You must have terminated the cables incorrectly, have you made a good
contact with the braid?


  #8  
Old November 10th 06, 02:44 PM posted to uk.tech.tv.sky
diy-newby
external usenet poster
 
Posts: 113
Default Sky + LNB & running another "Unofficial" Cable


"Conor" wrote in message
t...
In article , Ant says...

Tried reterminating the connectors at both ends and still no luck.
Downstairs still working fine

FWIW, I installed mine using my own gear. Works fine.

--
Conor

I'm really a nice guy. If I had friends, they would tell you.

Earn commission on online purchases, £2.50 just for signing up:
http://www.TopCashBack.co.uk/Conor/ref/index.htm


Very helpful that is!!!!


  #9  
Old November 10th 06, 03:31 PM posted to uk.tech.tv.sky
Spack
external usenet poster
 
Posts: 40
Default Sky + LNB & running another "Unofficial" Cable

Ant wrote on Fri, 10 Nov 2006 14:07:07 GMT:

Hi

After having Sky + installed the other day, my duaghter wanted the old
box wired into her bedroom to watch any FTV programs.

I connected up a cable to one of the free connections on the LNB and
ran it to the box in the bedroom.

All I can get is a message with "No signal is being received"

Is there a special configuration of LNB outlets to use? The 2 running
to the main Sky + box are the outside two with the two in the middle
spare


I did exactly the same as my house, works fine. You might have a damaged
cable, or didn't terminate the connections properly.

Dan


  #10  
Old November 10th 06, 04:55 PM posted to uk.tech.tv.sky
Ant
external usenet poster
 
Posts: 3
Default Sky + LNB & running another "Unofficial" Cable

On Fri, 10 Nov 2006 16:31:07 -0000, "Spack"
coughed and vomited forth:

Ant wrote on Fri, 10 Nov 2006 14:07:07 GMT:

Hi

After having Sky + installed the other day, my duaghter wanted the old
box wired into her bedroom to watch any FTV programs.

I connected up a cable to one of the free connections on the LNB and
ran it to the box in the bedroom.

All I can get is a message with "No signal is being received"

Is there a special configuration of LNB outlets to use? The 2 running
to the main Sky + box are the outside two with the two in the middle
spare


I did exactly the same as my house, works fine. You might have a damaged
cable, or didn't terminate the connections properly.

Dan

Probably the ****e cable from B&Q, but I'll check the box from
upstairs with the feed I know works as was previously suggested.

£12:50 for 25 metres of cable = good or bad???
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 02:07 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2012, Jelsoft Enterprises Ltd.SEO by vBSEO 2.4.0
Copyright ©2004-2012 Digital TV Banter.
The comments are property of their posters.