john hamilton wrote:
Neighbours Humax pvr 9200T freezes the television program picture
about two seconds just after the downloader program has done its job.
It does exactly the same thing everytime.

We have tried swithching off the power and disconnecting all the lead
connections for minutes and we are no better off. I suspect it not do
the recent software update that was sent out very recently. We will
do this as soon as we can get some movement out of it.

Since after many repeated attempts to get something to happen
immediately after connecting to a television program, would anyone
have any ideas on what might best be done now? Thanks for advice.

Have you tried what Humax call a default reset? (They say this
will not delete any recordings).

1. Power OFF the receiver
2. Disconnect the Aerial cable
3. Power On the receiver
4. Press MENU
5. Select Installation
6. Enter your password (default = 0000)
7. Select Default Setting
8. Select YES
9. Enter your password (Default = 0000)
10. When the receiver restarts, power off
11. Connect the Aerial Cable
12. Power ON - the receiver will then search for the channels.



--
Robin
PM may be sent to rbw0{at}hotmail{dot}com